1. AVK Fusion - Home /
  2. Product finder

AVK CONCENTRIC BUTTERFLY VALVE, WAFER TYPE

Cast SS body, loose EPDM liner, EN558/20, cast SS disc, SS shaft, A2 bolts, gearbox/lever

customercare

Contact

PT AVK Fusion Indonesia

Taman Tekno Blok F1/F - CDE, BSD, Setu, Kec. Serpong. Tangerang Selatan. Banten 15314, Indonesia.

Loose liner butterfly valve for neutral liquids like drinking water, river water and treated wastewater free from solids and fibrous impurities to max 70°C

The AVK Series 76 is a wide range of concentric, loose liner butterfly valves available in both flanged, wafer and lug design and with AVK's own high quality rubber liner that significantly increases the service life. The one-piece replaceable liner also serves as a profiled flange gasket and comes in either drinking water approved EPDM, high temperature EPDM or hydrocarbon resistant NBR. Disc material is stainless steel or epoxy coated ductile iron. The shaft in stainless steel, installed in low friction bronze/PTFE bearings in an anti-blow out design plus the unique disc sealing profile results in low operating torque and long life.
Variant 76/70-009
Connection: Wafer type valve
Material: Ductile iron
DN: DN50 - DN150
PN: PN 16

Features

  • Body in cast stainless steel, 1.4308/CF8 (AISI 304) with a long neck that makes room for insulation
  • Loose, replaceable liner in drinking water approved EPDM with reinforced seating area and integrated, profiled flange gaskets
  • Shaft seal integrated in the liner
  • Anti-blow-out shaft design with an anti blow-out plate at the top and a plug at the bottom
  • Radial bearings in low friction bronze/PTFE composite on a steel back
  • Shaft in stainless steel 1.4021/AISI 420
  • Bolts and washers are stainless steel A2 and disc material is cast stainless steel, 1.4308/CF8 (AISI 304)
  • Slim disc design with internal hexagon for drive shaft connection
  • DN≤200: Hand lever with a notch plate for locking in 8 different positions
  • DN≥200: Self-locking, handwheel operated worm gearbox

Downloads

Datasheet

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm		 PN
Class		 L
mm		 L1
mm		 H1
mm		 H3
mm		 W
mm		 W1
mm		 G
mm		 F
mm		 F2
mm		 D1
mm		 Actuator
flange		 Actuator
type		 Theoretical
weight/kg
76-0050-70-897602600023 50 PN16 83 43 125 259 237 126 - 12 12 9 F05 ALU LEVER 2.4
76-0065-70-897602600023 65 PN16 83 46 150 304 243 139 - 12 12 9 F05 ALU LEVER 2.9
76-0080-70-897602600023 80 PN16 83 46 157 320 247 146 - 12 12 9 F05 ALU LEVER 3.5
76-0100-70-897602600023 100 PN16 111 52 182 376 298 148 - 14 17 11 F07 ALU LEVER 4.7
76-0125-70-897602600023 125 PN16 111 56 201 409 312 177 - 14 19 14 F07 ALU LEVER 6.2
76-0050-70-897602600005 50 PN16 83 43 125 246 258 126 - 12 12 9 F05 PA LEVER 2.4
76-0065-70-897602600005 65 PN16 83 46 150 291 264 139 - 12 12 9 F05 PA LEVER 2.9
76-0080-70-897602600005 80 PN16 83 46 157 307 268 146 - 12 12 9 F05 PA LEVER 3.5
76-0100-70-897602600005 100 PN16 109 52 182 351 314 148 - 14 17 11 F07 PA LEVER 4.7
76-0125-70-897602600005 125 PN16 109 56 201 384 328 177 - 14 19 14 F07 PA LEVER 6.2
76-0150-70-897602600005 150 PN16 109 56 214 413 491 202 - 14 19 14 F07 PA LEVER 7.2
2D/3D drawings
Enquiry
Scroll for more info

Components

1. Plate POM
2. O-ring EPDM rubber
3. Ring POM
4. Body Stainless steel 1.4308, cast
5. Bearing Steel, PTFE coated
6. Shaft, drive Stainless steel 1.4021
7. Liner EPDM rubber
8. Disc Stainless steel 1.4308, cast
9. Shaft, stub Stainless steel 1.4021
10. O-ring NBR rubber
11. Plug POM
12. Bolt Stainless steel A2
13. Lever PA / Aluminium
14. Notch plate Steel S235JR
15. Washer Stainless steel A2
16. Nut Stainless steel A2
17. O-ring EPDM rubber
18. Gearbox Cast iron
19. Washer POM
20. O-ring EPDM rubber
21. Plug Stainless steel 1.4301

Test/Approvals

  • Tested according to EN 12266-1
  • WRAS approved materials

Standards

  • EN 1074 part 1 & 2, EN 593
  • Face-to-face dimension according to EN 558, Series 20
  • End connection to EN1092, PN10/16, ASME B16.1 CL150, JIS 10K
0 Files In the package