AVK BREAKABLE FLANGE UNIT
Optional equipment for series 24 wet barrel hydrants
PT AVK Fusion Indonesia
Taman Tekno Blok F1/F - CDE, BSD, Setu, Kec. Serpong. Tangerang Selatan. Banten 15314, Indonesia.
Breakable flange kit for series 24 wet barrel hydrants
The AVK series 24 breakable flange kit offers an economical and attractive solution to the problem that fire hydrants on the road side risk being hit by traffic, breaking off and being damaged beyond repair.
Installing the breakable flange in ground level between the subsurface and the above ground parts makes sure that the rupture happens at a well defined, predestined location that is easy, inexpensive and quick to repair.
| Varian 24/80-001 | |
|---|---|
| Koneksi: | No connection type specified |
| Material: | Ductile iron |
| DN: | DN150 |
| PN: | AWWA C503 |
fitur-fitur
- Quick and inexpensive repair of traffic damaged hydrants
- Coated with 250µm fusion bonded epoxy
- Bolts in stainless steel A4
- It is highly recommended to also install an AVK FlowGuard™ kit that will make sure the leak from a broken off wet barrel hydrant is kept at a very low level
Unduhan
Datasheet
Referensi no. dan dimensi:
Geser untuk info lebih lanjut
| AVK ref. no. | DN mm |
Number of bolts |
Theoretical weight/kg |
|---|---|---|---|
| 24-150-AB-3297 | 150 | 8 | 21 |
pertanyaan
Geser untuk info lebih lanjut
Komponen-komponen
| 1. | Hydrant body | Ductile Iron |
| 2. | Bolt | Stainless steel A4 |
| 3. | O-ring | NBR rubber |
| 4. | Break ring | Ductile iron GJS-500-7 |
| 5. | Nut | Stainless steel A4 |
| 6. | Flange section | Ductile iron A536 65-45-12 |