AVK KNIFE GATE VALVE, PN10
Rising stem and handwheel, replaceable top packing gland
PT AVK Fusion Indonesia
Taman Tekno Blok F1/F - CDE, BSD, Setu, Kec. Serpong. Tangerang Selatan. Banten 15314, Indonesia.
Knife gate valve with rising stem and handwheel for wastewater treatment 0°C to +80°C
AVK lug/wafer knife gate valves are bi-directional with full and plane bore. The protected sealings and high quality materials bring about a great performance and a long service life. AVK knife gate valves are available with lever, non-rising stem and handwheel, rising stem and handwheel, pneumatic actuator, ISO top flange for actuator or complete with electric actuator.
| Varian 702/20-103 | |
|---|---|
| Koneksi: | Flanged |
| Material: | Ductile iron |
| DN: | DN50 - DN600 |
| PN: | PN 10 |
fitur-fitur
- Replaceable top packing gland enables sealing replacement without disassembly of the valve
- The valve is self cleaning as particles will be pushed off the gate when opening the valve. For extra protection of the packing gland a scraper is available as an optional extra.
- Bi-directional, can be installed independent of the flow direction
- Full bore with no reduction of the flow
- Plane bottom prevents sediment from being accumulated
- No cavity in the body and thus no risk of clogging
- U-shaped one-piece NBR sealing between the body parts makes up for tolerances in coating and casting. It is reinforced with a steel insert to protect it from being damaged during operation.
- Encaged stem with yokes prepared for mounting of micro switches and inductive censors
- Stem and gate connection is secured with self-locking nuts
- Supports integrated in the body casting protect the gate from deflecting under pressure
- Body of ductile iron with 100-150 μm UV resistant polyester coating, RAL 5017. Optionally of acid-resistant stainless steel or duplex
- Yokes of carbon steel with coating 100-150 μm of plascoat PPA 571 Aqua
- Gate, stem, bolts and nuts of acid-resistant stainless steel
- Washers under the bolts protect the coating
- Slim design and low weight
- Approved according to the 2014/68/UE Pressure Equipment Directive
- Approved according to the 2014/34/EU ATEX Directive
- Available in larger dimensions
- Optionally in higher PN class
Unduhan
Datasheet
Installation, operation and maintenance manuals
Animation
| AVK_Knife_gate_valve_animation.mp4 |
Referensi no. dan dimensi:
Geser untuk info lebih lanjut
| AVK ref. no. | DN mm |
Flange drilling |
D mm |
L mm |
H3 mm |
H closed mm |
H open mm |
W mm |
Test pressure bar |
Work press. bar |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 702-0050-10-0000133 | 50 | PN10/16 | 175 | 43 | 424 | 292 | 359 | 131 | 15 | 10 | 8.7 |
| 702-0065-10-0000133 | 65 | PN10/16 | 175 | 46 | 471 | 317 | 399 | 143 | 15 | 10 | 10 |
| 702-0080-10-0000135 | 80 | PN10/16 | 225 | 46 | 536 | 361 | 444 | 184 | 15 | 10 | 15 |
| 702-0100-10-0000144 | 100 | PN10/16 | 225 | 52 | 600 | 396 | 499 | 202 | 15 | 10 | 18 |
| 702-0150-10-0000147 | 150 | PN10/16 | 300 | 56 | 809 | 523 | 674 | 270 | 15 | 10 | 32 |
| 702-0350-10-0000026 | 350 | PN10 | 400 | 78 | 1562 | 951 | 1303 | 518 | 9 | 6 | 131 |
| 702-0400-10-0000016 | 400 | PN10 | 400 | 90 | 1749 | 1059 | 1461 | 576 | 9 | 6 | 153 |
| 702-0450-10-0000022 | 450 | PN10 | 500 | 90 | 1977 | 1206 | 1664 | 560 | 6 | 4 | 270 |
| 702-0500-10-0000015 | 500 | PN10 | 500 | 95 | 2165 | 1308 | 1816 | 698 | 6 | 4 | 282 |
| 702-0600-10-0000015 | 600 | PN10 | 500 | 105 | 2513 | 1497 | 2105 | 817 | 6 | 4 | 398 |
Gambar 2D/3D
pertanyaan
Geser untuk info lebih lanjut
Komponen-komponen
| 1. | Plate | Carbon steel |
| 2. | Stem | Stainless steel AISI 316 |
| 3. | Bolt | Stainless steel A4 |
| 4. | Top packing gland | Ductile iron GJS-400-15 |
| 5. | Bolt | Stainless steel A4 |
| 6. | Packing | NBR + PTFE |
| 7. | Body | Ductile iron GJS-400-15 |
| 8. | Gate | Stainless steel AISI 316 |
| 9. | U-shaped seal | Steel / NBR |
| 10. | Bolt | Stainless steel A4 |
| 11. | Handwheel | Steel |
| 12. | Washer | Stainless steel A4 |
| 13. | Bolt | Stainless steel A4 |
| 14. | Bearing | Carbon steel |
Tes / Sertifikasi
- ISO 45001 certified - SAI Global Certification
- ISO 14001 certified - SAI Global Environment
- ISO 9001 certified - SAI Global Quality
Standar
- Face-to-face dimension according to EN 558, Series 20
- Flange drilling to EN1092, PN10/16
